 |
|
Lens Mount Instructions for: |
|
|
Lens Mount Instructions for: |
|
PowerShot G1, G2, A10, A20 |
Attaching the Lens Mount:
Make sure the camera is in the "off" position.
Locate and remove the trim ring that surrounds the lens assembly (see figures 1 and 2).
Put the trim ring somewhere safe so it does not get lost.
Attach the Tiffen lens mount by screwing it onto the threads on the camera body (see figure 3).
Lenses and filters can now be attached to the threads on the lens mount (see figure 4).
The lens mount can be left on at all times if desired.
Removing the Lens Mount:
To remove the lens mount, simply reverse the procedure.
Replace the trim ring after removing the lens mount.
