Lens Mount Instructions for:

 

Photosmart 315, 320

Attaching the Lens Mount:

bullet

Make sure the camera is in the "on" position, with the lens door fully open.

bullet

Holding the camera with the bottom facing up, locate the tripod socket on the camera bottom (see figure 1).

bullet

Align the lens mount's brass screw with the tripod socket on the camera.  Start screw by hand (see figure 2).

bullet

Be sure the screw is positioned straight and properly thread into the socket.

bullet

Use a coin to complete tightening of the screw (see figure 3).

bullet

Lenses and filters can now be attached to the threads on the lens mount.

bullet

The camera can still be mounted to a tripod.

bullet

The lens mount can be left on at all times if desired.  The mount allows the lens door to move enough to allow shutting the camera off.

Removing the Lens Mount:

bullet

To remove the lens mount, simply reverse the procedure.

 

Back To Digital Imaging Products