Photosmart 215, 210
	DC215, DC210
	PDC-1300, PDC-1100

Attaching the Lens Mount:

	Make sure the camera is in the "off" position.
	With the camera facing you, position the lens mount on the right side of camera and align with the camera lens.
	Slide the lens mount on to the camera (see figure 2).  The mount is properly aligned with an audible click.
	NOTE:  For the Kodak DC 210, the lens mount slips over the top of the camera, not over the side as pictured.

Removing the Lens Mount:

	Make sure the camera is in the "off" position.
	DO NOT pull the rear of the lens mount upward.
	Lift the front of the lens mount and slide it off (see figure 4).