Attaching the Lens Mount:

	Make sure the camera is in the "off" position.
	Holding the camera with the bottom facing up, locate the tripod socket on the camera bottom (see figure 1).
	Align the lens mount's brass screw with the tripod socket on the camera.  Start screw by hand (see figure 2).
	Be sure the screw is positioned straight and properly thread into the socket.
	Use a coin to complete tightening of the screw (see figure 3).
	Lenses and filters can now be attached to the threads on the lens mount.
	Attach the included 37mm to 43mm Step-Up Ring for use with 43mm lenses (see figure 4).
	The camera can still be mounted to a tripod.

Removing the Lens Mount:

To remove the lens mount, simply reverse the procedure.